SN74LVTH16373GQLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Weight | 58.796911mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVTH |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVTH16373 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 2.7 ns |
| Turn On Delay Time | 3 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Number of Input Lines | 1 |
| Independent Circuits | 2 |
| Number of Output Lines | 3 |
| Length | 7mm |
| Width | 4.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LVTH16373GQLR Overview
Package 56-VFBGA includes it. It is packaged in the way of Cut Tape (CT). Tri-State is used for the output it is configured with. This electrical device has the logic type D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. The supply voltage of the device is 2.7V~3.6V. There is -40°C~85°C operating temperature. There are a number of FPGAs in this series, including this one. The design of this electronic part contains 16 bits. This device has 56 terminations. As a member of the 74LVTH16373 family, it falls under that category. The device works with a voltage of 3.3V for its supply voltage. It has 56 pins that makes it easy to use. LVT is the family name of this electronic device. The pin configuration of the device is 56. It is mounted according to the Surface Mount method. This device has 2 ports. FF/Latches is the subcategory of this part. It contains 1 input lines where electronic circuits are present. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. Optimal efficiency requires 3.3V as the supply voltage. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. The circuit's superior flexibility is achieved through the use of 8 circuits.
SN74LVTH16373GQLR Features
56-VFBGA package
74LVTH series
16 Bits
74LVTH16373 family
56 pin count
56 pins
SN74LVTH16373GQLR Applications
There are a lot of Texas Instruments SN74LVTH16373GQLR Latches applications.
- Synchronous frequency dividers
- Double bus register system
- Up-Down Johnson
- Shift right with parallel loading
- Multistage ripple counting
- Ring counter
- Serial Output Register
- Pattern generators
- Shift Registers
- Counting
