SN74LVTH16373ZQLR
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Weight | 58.28662mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Termination | SMD/SMT |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVTH16373 |
| Pin Count | 56 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 16 |
| Propagation Delay | 2.7 ns |
| Turn On Delay Time | 3 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 3.8 ns |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Output Lines | 16 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1mm |
| Length | 7mm |
| Width | 4.5mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVTH16373ZQLR Overview
In the package 56-VFBGA, it can be found. Tape & Reel (TR) is the packaging method. In its configuration, Tri-State is used as the output. The Logic type of this electrical device is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. A voltage of 2.7V~3.6V is used as the supply voltage for this device. There is a temperature of -40°C~85°C at which the system operates. An FPGA of this type belongs to the 74LVTH series. The design of this electronic part is based on 16 bits. A device with this design has 56 terminations. This type belongs to the 74LVTH16373 family. The supply voltage of the device is 3.3V. With 56 pins, it is equipped. LVT is the family name of this electronic device. With the design of the board, there are only 56 pins. The electronic part is mounted using the Surface Mount method. This device has 2 ports. The part is in the FF/Latches subcategory. Vsup reaches 3.6V as the maximum supply voltage. This device is well suited for TR based on its reliable performance. As the output current is 64mA, the design flexibility is maximum. High efficiency requires a supply voltage of 3.3V. A binary equivalent of the input line is generated by the 16 output lines. It consists of 2 elements. Maximum power supply (ICC) for its operation is 5mA.
SN74LVTH16373ZQLR Features
56-VFBGA package
74LVTH series
16 Bits
74LVTH16373 family
56 pin count
56 pins
2 elements
SN74LVTH16373ZQLR Applications
There are a lot of Texas Instruments SN74LVTH16373ZQLR Latches applications.
- Parallel Input
- Data acquisition
- Parallel data storage
- Shift right with parallel loading
- Up-Down Johnson
- Shift Registers
- Synchronous frequency dividers
- Lamp and Display (LED)
- Frequency
- Motor Drives
