SN74LVTH16374DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVTH16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 16 |
| Clock Frequency | 160MHz |
| Propagation Delay | 3 ns |
| Turn On Delay Time | 3 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVTH16374DL Overview
The flip flop is packaged in 48-BSSOP (0.295, 7.50mm Width). The package Tubecontains it. It is configured with Tri-State, Non-Invertedas an output. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. The supply voltage is set to 2.7V~3.6V. In this case, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 74LVTH series. You should not exceed 160MHzin the output frequency of the device. A total of 2elements are present in it. During its operation, it consumes 190μA quiescent energy. A total of 48terminations have been recorded. If you search by 74LVTH16374, you will find similar parts. The power source is powered by 3.3V. This JK flip flop has a 3pFfarad input capacitance. In terms of electronic devices, this device belongs to the LVTfamily of devices. It is mounted in the way of Surface Mount. As you can see from the design, it has pins with 48. Its clock edge trigger type is Positive Edge. This device has the base part number Bus Driver/Transceiver. There are 16bits in its design. This flip flop has a total of 2ports. If high efficiency is to be achieved, the supply voltage should be maintained at 3.3V. With an output current of 64mA, it is possible to design the device in any way you want. It is designed with 3 output lines. A total of 1input lines have been provided.
SN74LVTH16374DL Features
Tube package
74LVTH series
48 pins
16 Bits
SN74LVTH16374DL Applications
There are a lot of Texas Instruments SN74LVTH16374DL Flip Flops applications.
- ATE
- Event Detectors
- Count Modes
- ESD performance
- Parallel data storage
- Registers
- Instrumentation
- Latch
- Safety Clamp
- Modulo – n – counter
