Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
56 |
Weight |
694.790113mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74LVTH |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Additional Feature |
WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION |
Packing Method |
TAPE AND REEL |
Technology |
BICMOS |
Voltage - Supply |
2.7V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74LVTH16500 |
Pin Count |
56 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
2.7V |
Number of Channels |
18 |
Number of Circuits |
18-Bit |
Number of Ports |
2 |
Number of Bits |
18 |
Propagation Delay |
5.9 ns |
Turn On Delay Time |
6.3 ns |
Family |
LVT |
Logic Function |
Transceiver |
Output Characteristics |
3-STATE |
Current - Output High, Low |
32mA 64mA |
Logic Type |
Universal Bus Transceiver |
Max I(ol) |
0.064 A |
Prop. Delay@Nom-Sup |
3.7 ns |
Trigger Type |
NEGATIVE EDGE |
Control Type |
INDEPENDENT CONTROL |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height Seated (Max) |
2.79mm |
Width |
7.49mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LVTH16500DLR Overview
The package 56-BSSOP (0.295, 7.50mm Width) contains this file embedded in it. Tape & Reel (TR) is how it's packaged. It achieves superior flexibility through 18-Bit circuits. The Logic type of this electrical device is Universal Bus Transceiver. The electronic part is mounted in Surface Mount-direction. A higher operating temperature than -40°C~85°C is recommended. The High/Low output current of 32mA 64mA makes it feature maximum design flexibility. It belongs to the 74LVTH series of FPGAs. There is a supply voltage of 2.7V~3.6V that it operates on. The 74LVTH16500 family is the one that this is part of. It can be said that there is a technique of terminating transmission lines that uses a device that matches the characteristics of the line impedance, called 56 terminations. As a rule of thumb, the supply voltage should be maintained above 3.3V to ensure normal operation. This device is equipped with 56 pins. In order to design this electronic part, 18 Bits have been used. Termination with a 2 termination matches the characteristic impedance of the transmission line. In this case, the electronic part will be mounted in the Surface Mount-direction. 56 pins are used in the design of this board. The device belongs to the LVT family of electronic devices. It reaches 3.6V when the maximum supply voltage (Vsup) is reached. It is necessary to have a greater supply voltage (Vsup) than 2.7V in order to operate correctly. An element of this system consists of 1 components. There is a trigger configured with NEGATIVE EDGE. As a result of its reliable performance, this device is well suited for TAPE AND REEL. It is also characterized by WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION as another characteristic. We are seeing an increase in the number of channels, which is good/bad: 18. There is a supply voltage of 3.3V that is used to power this electrical part.
SN74LVTH16500DLR Features
56-BSSOP (0.295, 7.50mm Width) package
74LVTH series
74LVTH16500 family
56 pin count
56 pins
1 elements
SN74LVTH16500DLR Applications
There are a lot of Texas Instruments SN74LVTH16500DLR Universal Bus Functions applications.
- Island protection
- Alarm circuit using LDR
- Digital Electronics
- Pocket PC
- Flashlight
- Flip flops
- Washing machine
- Square wave oscillators
- Burglar alarms and buzzers
- Industrial Controls