SN74LVTH16500GQLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Weight | 58.796911mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVTH |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION |
| HTS Code | 8542.39.00.01 |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVTH16500 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 18-Bit |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 5.9 ns |
| Family | LVT |
| Logic Function | Transceiver |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | Universal Bus Transceiver |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 3.7 ns |
| Trigger Type | NEGATIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| Width | 4.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LVTH16500GQLR Overview
As part of the 56-VFBGA package, it is embedded. Packaged in the manner of Cut Tape (CT). It achieves superior flexibility through 18-Bit circuits. As far as the logic type of this electrical device is concerned, it is Universal Bus Transceiver. As you can see from the image, this electronic component is mounted in a Surface Mount-direction. The operating temperature should be higher than -40°C~85°C. As 32mA 64mA offers a high/low output current, it is versatile in terms of design. An FPGA belonging to the 74LVTH series is a type of FPGA. The supply voltage is 2.7V~3.6V. The 74LVTH16500 family is comprised of it. It is also possible to terminate a transmission line with a 56 termination, which is where the transmission line is closed with a device that matches the characteristic impedance of the transmission line. In order to maintain normal operation of the device, the supply voltage should remain above 3.3V. The 56 pin count is provided. In order to design this electronic part, 18 Bits have been used. It is possible to terminate a transmission line with a device that matches the line's characteristic impedance, known as 2 terminations. As you can see from the image, this electronic component is mounted in a Surface Mount-direction. 56 pins are used in the design. It is a LVT-family electronic device. A maximum supply voltage (Vsup) is reached at 3.6V. It is necessary to have a greater supply voltage (Vsup) than 2.7V in order to operate correctly. 3.3V power supplies are used to power the device. It is configured with a trigger that uses a NEGATIVE EDGE-value. Based on its reliable performance, this device is well suited for TAPE AND REEL. Moreover, it is characterized by WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION as well.
SN74LVTH16500GQLR Features
56-VFBGA package
74LVTH series
74LVTH16500 family
56 pin count
56 pins
3.3V power supplies
SN74LVTH16500GQLR Applications
There are a lot of Texas Instruments SN74LVTH16500GQLR Universal Bus Functions applications.
- Memory
- Electronic and electrical project circuits
- Digital camera
- Illumination
- Printer
- VCD
- Automotive voltage monitoring
- Laptop
- Overcurrent/Short circuit protection
- Air conditioner
