SN74LVTH16646DLG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | WITH DIRECTION CONTROL |
| Subcategory | Bus Driver/Transceivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Pin Count | 56 |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 4.7 ns |
| Turn On Delay Time | 6.8 ns |
| Family | LVT |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | REGISTERED BUS TRANSCEIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 3.4 ns |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | 64mA |
| Low Level Output Current | 32mA |
| Control Type | INDEPENDENT CONTROL |
| Power Supply Current-Max (ICC) | 5mA |
| Translation | N/A |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LVTH16646DLG4 Overview
Logical driver uses a neat SSOP package. Rail/Tube external packaging. 56 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. There is a LVT family part that is attached to this electronic component. 56 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 56 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under INDEPENDENT CONTROL control technology. To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the logical driver. 16 bits are included within the electrical component. Logical driver features WITH DIRECTION CONTROL to better serve the need. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 32mA to its low level. In high level output mode, the electronic parts may conduct 64mA of current. Voltage used to run voltage buffer should be 2.7V at least. In regard to the maximum supply voltage, buffer driver is rated 3.6V. It is known as a REGISTERED BUS TRANSCEIVER logic IC. The fundamental operation of logical driver is based on 2 circuits. Logical driver adapts POSITIVE EDGE trigger.
SN74LVTH16646DLG4 Features
Bus Driver/Transceivers
WITH DIRECTION CONTROL
High Level Output: 32mA
Low Level Output: 64mA
REGISTERED BUS TRANSCEIVER Logic IC
Trigger Type: POSITIVE EDGE
SN74LVTH16646DLG4 Applications
There are a lot of Texas Instruments SN74LVTH16646DLG4 Buffers & Transceivers applications.
- Interconnection between switches and computers
- Solenoids
- LAN, SAN, WAN (local, storage, work area networks)
- Structural bonding
- Single to Multimode Fiber Conversion
- Notebook
- Gigabit Ethernet
- Wireless modems
- Carrier phase observations
- Shortwave receiver
