SN74LVTH273DWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 150MHz |
| Pin Count | 20 |
| Output Type | TTL |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Current - Output | 64mA |
| Propagation Delay | 3.2 ns |
| Turn On Delay Time | 3.2 ns |
| Family | LVT |
| Logic Function | D-Type |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 4.9 ns |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Power Supply Current-Max (ICC) | 5mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LVTH273DWG4 Overview
The flip flop is packaged in a case of SOIC. This output is configured with TTL. The list contains 1 elements. There have been 20 terminations. A voltage of 3.3V is used to power it. LVTis the family of this D flip flop. There is an electronic part that is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. There is a clock edge trigger type of Positive Edgeon this device. This device is part of the FF/Latchesbase part number family. For high efficiency, the supply voltage should be kept at 3.3V. -32mAis set as the high level output current. In the low level output current setting, the current is set to 64mA. A temperature below 85°Cis recommended for operation. Ideally, the operating temperature should be greater than -40°C. It is powered by 2.7V as its minimum supply voltage. In this case, it supports a maximum supply voltage of 3.6V. This frequency can be achieved at 150MHz. It uses D FLIP-FLOPas its logic IC. A total of 1 functions are provided by this T flip flop. The D latch is equipped with 20 pins. The output current of 64mA makes it feature maximum design flexibility.
SN74LVTH273DWG4 Features
20 pins
1 Functions
20 pin count
SN74LVTH273DWG4 Applications
There are a lot of Texas Instruments SN74LVTH273DWG4 Flip Flops applications.
- Safety Clamp
- QML qualified product
- ESD protection
- Matched Rise and Fall
- Buffered Clock
- Functionally equivalent to the MC10/100EL29
- Storage registers
- Common Clocks
- Individual Asynchronous Resets
- Latch
