SN74LVTH273PWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 150MHz |
| Pin Count | 20 |
| Output Type | TTL |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Current - Output | 64mA |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 3.2 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 4.9 ns |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LVTH273PWE4 Overview
It is embeded in TSSOP case. In the configuration, TTLis used as the output. In total, there are 1 elements. There are 20 terminations,A voltage of 3.3V is used to power it. It belongs to the family of electronic devices known as LVT. There is an electronic component mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. The clock edge trigger type for this device is Positive Edge. The part you are looking for is included in FF/Latches. In order to ensure high efficiency, the supply voltage should remain at 3.3V. High level output current is set to -32mA. A 64mAvalue is set for low-level output current. There should be a temperature below 85°Cduring operation. A temperature above -40°Cshould be used for the operation. A minimum supply voltage of 2.7V is required for these RS flip flops to operate. A maximum voltage of 3.6V can be provided by it. This frequency can be achieved 150MHz. It adopts a logic IC of type D FLIP-FLOP. Currently, it is equipped with 1 functions . It is equipped with 20 pin count. As a result of the output current of 64mA, the design flexibility is maximized.
SN74LVTH273PWE4 Features
20 pins
1 Functions
20 pin count
SN74LVTH273PWE4 Applications
There are a lot of Texas Instruments SN74LVTH273PWE4 Flip Flops applications.
- Buffer registers
- High Performance Logic for test systems
- ESCC
- Count Modes
- CMOS Process
- Instrumentation
- Event Detectors
- Data transfer
- Differential Individual
- Digital electronics systems
