SN74LVTH322374KR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 96-LFBGA |
| Number of Pins | 96 |
| Weight | 174.20782mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVTH |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 96 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVTH322374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 4 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 32 |
| Clock Frequency | 160MHz |
| Propagation Delay | 3.4 ns |
| Turn On Delay Time | 3.4 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 380μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 12mA 12mA |
| Max I(ol) | 0.012 A |
| Max Propagation Delay @ V, Max CL | 5.3ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 5.3 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 160000000Hz |
| Length | 13.5mm |
| Width | 5.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LVTH322374KR Overview
As a result, it is packaged as 96-LFBGA. The package Cut Tape (CT)contains it. It is configured with Tri-State, Non-Invertedas an output. The trigger configured with it uses Positive Edge. Surface Mountis in the way of this electric part. With a supply voltage of 2.7V~3.6V volts, it operates. A temperature of -40°C~85°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74LVTH series. You should not exceed 160MHzin its output frequency. D latch consists of 4 elements. As a result, it consumes 380μA quiescent current and is not affected by external forces. A total of 96terminations have been recorded. The 74LVTH322374family includes it. The power source is powered by 3.3V. A 3pFfarad input capacitance is provided by this T flip flop. In terms of electronic devices, this device belongs to the LVTfamily of devices. Electronic part Surface Mountis mounted in the way. The electronic flip flop is designed with pins 96. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. An electronic part with 32bits has been designed. Vsup reaches 3.6V, the maximal supply voltage. The supply voltage (Vsup) should be kept above 2.7V for normal operation. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. This D flip flop is equipped with 0 ports. For high efficiency, the supply voltage should be kept at 3.3V. As of now, there are 8input lines.
SN74LVTH322374KR Features
Cut Tape (CT) package
74LVTH series
96 pins
32 Bits
SN74LVTH322374KR Applications
There are a lot of Texas Instruments SN74LVTH322374KR Flip Flops applications.
- Balanced 24 mA output drivers
- Memory
- Frequency Divider circuits
- Shift registers
- Matched Rise and Fall
- Individual Asynchronous Resets
- 2 – Bit synchronous counter
- Asynchronous counter
- Bus hold
- Communications
