SN74LVTH32373GKER
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 96-LFBGA |
| Number of Pins | 96 |
| Weight | 174.20782mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e0 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 96 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Base Part Number | 74LVTH32373 |
| Pin Count | 96 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5.4 ns |
| Turn On Delay Time | 3 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 3.8 ns |
| Control Type | ENABLE LOW/HIGH |
| Independent Circuits | 4 |
| Number of Output Lines | 32 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.4mm |
| Length | 13.5mm |
| Width | 5.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LVTH32373GKER Overview
In the 96-LFBGA package, it can be found as an embedded module. As a result, it has a packaging of Tape & Reel (TR). In this configuration, the output is set to Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. With a supply voltage of 2.7V~3.6V, it operates. The temperature at which the machine is operating is -40°C~85°C. In the 74LVTH series, this FPGA is located. With this electronic part, there are 8 bits. There are 96 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This type belongs to the 74LVTH32373 family. The supply voltage of the device is 3.3V. The 96 pind are equipped with it. In terms of electronic devices, this one is in the LVT family. This board has 96 pins on it, which is what it is designed for. This electronic part is mounted in the way of Surface Mount. This device is equipped with 2 ports. The part belongs to the FF/Latches subcategory. During this period, the maximum supply voltage (Vsup) reaches 3.6V. In order to operate properly, the supply voltage (Vsup) should be greater than 2.7V. On the basis of its reliability, this device is well suited for TR. The supply voltage should be maintained at 3V for high efficiency. Input lines are converted into binary equivalents by 32 output lines. To achieve its exceptional flexibility, it relies on 1 circuits.
SN74LVTH32373GKER Features
96-LFBGA package
74LVTH series
8 Bits
74LVTH32373 family
96 pin count
96 pins
SN74LVTH32373GKER Applications
There are a lot of Texas Instruments SN74LVTH32373GKER Latches applications.
- PCs and Notebooks
- Display
- Registers
- Parallel-to-Serial Data Conversion
- Counting
- Shift right with parallel loading
- Accumulator Registers
- Meter applications
- Counter timers
- Control circuits
