SN74LVTH32374GKER
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 96-LFBGA |
| Number of Pins | 96 |
| Weight | 174.20782mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVTH |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 96 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVTH32374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 4 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 32 |
| Clock Frequency | 160MHz |
| Propagation Delay | 3 ns |
| Turn On Delay Time | 3 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 380μA |
| Current - Output High, Low | 32mA 64mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 5.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LVTH32374GKER Overview
It is packaged in the way of 96-LFBGA. A package named Cut Tape (CT)includes it. It is configured with Tri-State, Non-Invertedas an output. It is configured with the trigger Positive Edge. Surface Mountis occupied by this electronic component. The supply voltage is set to 2.7V~3.6V. A temperature of -40°C~85°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. The 74LVTHseries comprises this type of FPGA. It should not exceed 160MHzin its output frequency. In total, it contains 4 elements. As a result, it consumes 380μA of quiescent current without being affected by external factors. A total of 96terminations have been recorded. JK flip flop belongs to 74LVTH32374 family. Power is provided by a 3.3V supply. This T flip flop has a capacitance of 4pF farads at the input. In terms of electronic devices, this device belongs to the LVTfamily of devices. Surface Mount mounts this electronic component. 96pins are included in its design. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. It is designed with 32bits. The supply voltage (Vsup) should be kept above 2.7V for normal operation. The superior flexibility of this circuit is achieved by using 1 circuits. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. The D flip flop has no ports embedded. High efficiency requires the supply voltage to be maintained at 3.3V. In order for the chip to function, it has 3output lines.
SN74LVTH32374GKER Features
Cut Tape (CT) package
74LVTH series
96 pins
32 Bits
SN74LVTH32374GKER Applications
There are a lot of Texas Instruments SN74LVTH32374GKER Flip Flops applications.
- ESD protection
- Storage registers
- Dynamic threshold performance
- Single Down Count-Control Line
- Memory
- Convert a momentary switch to a toggle switch
- ESD performance
- Single Up Count-Control Line
- Supports Live Insertion
- Patented noise
