banner_page

SN74LVTH373DWG4

D-Type, Latch 8 Bits Latches 20 Pins DUAL BICMOS SOIC


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LVTH373DWG4
  • Package: SOIC
  • Datasheet: -
  • Stock: 593
  • Description: D-Type, Latch 8 Bits Latches 20 Pins DUAL BICMOS SOIC(Kg)

Details

Tags

Parameters
Packing Method TUBE
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Pin Count 20
Operating Supply Voltage 3.3V
Number of Elements 1
Polarity Non-Inverting
Temperature Grade INDUSTRIAL
Max Supply Voltage 3.6V
Min Supply Voltage 2.7V
Load Capacitance 50pF
Number of Ports 2
Current - Output 64mA
Number of Bits 8
Propagation Delay 5.9 ns
Turn On Delay Time 2.7 ns
Family LVT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.064 A
Prop. Delay@Nom-Sup 3.9 ns
High Level Output Current -32mA
Low Level Output Current 32mA
Power Supply Current-Max (ICC) 5mA
Number of Input Lines 8
Height 2.35mm
Length 12.8mm
Width 7.52mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Mount Surface Mount
Package / Case SOIC
Number of Pins 20
Weight 500.709277mg
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches

SN74LVTH373DWG4 Overview


Package SOIC includes it. With this electronic part, there are 8 bits. In this device, there are 20 terminations that have been designed. The supply voltage of the device is 3.3V. It is equipped with 20 pin count. There is a device in this electronic family called LVT. The 20 pins are designed into it. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports. There is a subcategory of FF/Latches for this part. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Considering the reliability of this device, it would be a good candidate for TUBE. A high level of efficiency is achieved by maintaining the supply voltage at 3.3V. A total of 1 elements are contained in it. As its maximal power current (ICC) reaches 5mA, it is able to operate. The low level output current is set to 32mA. There is -32mA output current at the high level. Lower than 85°C is the recommended operating temperature. In order for the system to operate properly, the operating temperature should be higher than -40°C. There is a maximum supply voltage of 3.6V supported by this device. The minimal supply voltage is 2.7V. As for the logic IC it uses, it is a BUS DRIVER. The 64mA output current gives it maximum design flexibility.

SN74LVTH373DWG4 Features


SOIC package
8 Bits
20 pin count
20 pins
1 elements

SN74LVTH373DWG4 Applications


There are a lot of Texas Instruments SN74LVTH373DWG4 Latches applications.

  • Registers
  • PCs and Notebooks
  • General-Purpose Register
  • A/D and D/A conversion
  • Avionics
  • Counters
  • Parallel data storage
  • Parallel-to-Serial Data Conversion
  • Lamp and Display (LED)
  • Automotive ADAS

Write a review

Note: HTML is not translated!
    Bad           Good