SN74LVTH373DWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVTH373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.9 ns |
| Turn On Delay Time | 2.7 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 3.9 ns |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVTH373DWRG4 Overview
The 20-SOIC (0.295, 7.50mm Width) package contains it. The package is in the form of Tape & Reel (TR). It uses Tri-State as its output configuration. D-Type Transparent Latch is the logic type of this electrical device. Based on the way of Surface Mount, this electronic part is mounted. A 2.7V~3.6V voltage supply is required for operation. The operating temperature is -40°C~85°C. In the 74LVTH series, this FPGA is located. The design of this electronic part contains 8 bits. In this device, there are 20 terminations that have been designed. The family 74LVTH373 includes it. In order to operate it, the supply voltage must be 3.3V. The device is equipped with 20 pins. There is a device in this electronic family called LVT. The 20 pins are designed into it. It is mounted according to the Surface Mount method. In this device, there is a total of 2 ports available for use. FF/Latches is the subcategory of this part. 3.6V is the maximum supply voltage (Vsup). It is recommended to have a higher supply voltage (Vsup) than 2.7V. On the basis of its reliability, this device is well suited for TR. With an output current of 64mA, it is highly flexible in terms of design. A high efficiency supply voltage should be maintained at 3.3V. Input lines are generated as binary equivalents by 8 output lines. A total of 1 elements are contained in it. When the maximum power current (ICC) is supplied for its operation, it reaches 5mA.
SN74LVTH373DWRG4 Features
20-SOIC (0.295, 7.50mm Width) package
74LVTH series
8 Bits
74LVTH373 family
20 pin count
20 pins
1 elements
SN74LVTH373DWRG4 Applications
There are a lot of Texas Instruments SN74LVTH373DWRG4 Latches applications.
- Counters
- TV Set-top Boxes
- Digital bus buffer
- Motor Drives
- PCs and Notebooks
- Pattern Generators
- Automotive Cluster
- Relay
- Frequency dividing
- Serial Output Register
