SN74LVTH373PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVTH373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 2.6 ns |
| Quiescent Current | 5mA |
| Turn On Delay Time | 2.7 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 3.9 ns |
| Control Type | ENABLE LOW |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVTH373PW Overview
20-TSSOP (0.173, 4.40mm Width) contains it. The package is in the form of Tube. Tri-State is the output configured for it. There is a logic type of D-Type Transparent Latch associated with this electrical device. A Surface Mount mount is used for mounting this electronic part. A 2.7V~3.6V voltage supply is required for operation. A temperature of -40°C~85°C is used for operation. 74LVTH is the series number of this FPGA. The design of this electronic part is based on 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. It is a member of the 74LVTH373 family. The device works with a voltage of 3.3V for its supply voltage. The device is equipped with 20 pins. There is a device in this electronic family called LVT. There are 20 pins on it. Mounting this electronic component follows the Surface Mount method. In this device, there is a total of 2 ports available for use. This part is included in FF/Latches. It is possible to reach 3.6V when the maximum supply voltage (Vsup) has been reached. In order to operate properly, the supply voltage (Vsup) should be greater than 2.7V. As the output current is 64mA, the design flexibility is maximum. High efficiency requires maintaining the supply voltage at 3.3V. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Without external influences, it consumes 5mA of quiescent current. A total of 1 elements make up this object.
SN74LVTH373PW Features
20-TSSOP (0.173, 4.40mm Width) package
74LVTH series
8 Bits
74LVTH373 family
20 pin count
20 pins
1 elements
SN74LVTH373PW Applications
There are a lot of Texas Instruments SN74LVTH373PW Latches applications.
- Parallel data synchronization
- Storage
- Shift right register
- Double bus register system
- Frequency dividing
- Shift left with parallel loading
- Serial Output Register
- Instrumentation
- Parallel Input
- Control circuits
