SN74LVTH373PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVTH373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.9 ns |
| Turn On Delay Time | 2.7 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 3.9 ns |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVTH373PWR Overview
20-TSSOP (0.173, 4.40mm Width) contains it. A Cut Tape (CT) package is used to package it. Tri-State is used for the output it is configured with. This electrical device has a logic type of D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. With a supply voltage of 2.7V~3.6V, it operates. A temperature of -40°C~85°C is set as the operating temperature. This FPGA is part of the 74LVTH series. Electronic parts with 8 bits are designed for this application. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family it belongs to is 74LVTH373. With the supply voltage set at 3.3V, it is able to operate. 20 pins are provided. There is a device in this electronic family called LVT. This board has 20 pins on it, which is what it is designed for. This electronic part is mounted in the way of Surface Mount. In this device, there is a total of 2 ports available for use. The part belongs to the FF/Latches subcategory. The maximal supply voltage (Vsup) reaches 3.6V. A voltage greater than 2.7V must be supplied as a power supply (Vsup). There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Its reliable performance makes it an excellent choice for TR. As the output current is 64mA, the design flexibility is maximum. A high efficiency supply voltage should be maintained at 3.3V. In order for the device to operate at its maximum power, the maximum power current (ICC) of 5mA is needed for operation.
SN74LVTH373PWR Features
20-TSSOP (0.173, 4.40mm Width) package
74LVTH series
8 Bits
74LVTH373 family
20 pin count
20 pins
SN74LVTH373PWR Applications
There are a lot of Texas Instruments SN74LVTH373PWR Latches applications.
- Data acquisition
- Sample and hold register
- Shift Registers
- Control circuits
- Decade counting
- Lamp and Display (LED)
- Registers
- Automotive Infotainment
- Automotive Cluster
- Automatic test equipment
