SN74LVTH374PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVTH374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 2.9 ns |
| Turn On Delay Time | 2.9 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVTH374PWR Overview
It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tape & Reel (TR). Tri-State, Non-Invertedis the output configured for it. It is configured with a trigger that uses a value of Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 2.7V~3.6Vvolt supply, it operates as follows. It is operating at a temperature of -40°C~85°C TA. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74LVTH series. It should not exceed 150MHzin its output frequency. The list contains 1 elements. As a result, it consumes 190μA quiescent current. 20terminations have occurred. You can search similar parts based on 74LVTH374. Power is supplied from a voltage of 3.3V volts. Its input capacitance is 3pF farads. It is a member of the LVTfamily of D flip flop. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 20 pins. It has a clock edge trigger type of Positive Edge. This device has the base part number Bus Driver/Transceiver. It is designed with 8bits. The supply voltage (Vsup) should be kept above 2.7V for normal operation. To achieve this superior flexibility, 8 circuits are used. As a result of its reliable performance, this T flip flop is suitable for TR. This flip flop has a total of 2ports. In order to ensure high efficiency, the supply voltage should remain at 3.3V. In addition to its maximum design flexibility, the output current of the T flip flop is 64mA. There are 3 output lines on it.
SN74LVTH374PWR Features
Tape & Reel (TR) package
74LVTH series
20 pins
8 Bits
SN74LVTH374PWR Applications
There are a lot of Texas Instruments SN74LVTH374PWR Flip Flops applications.
- ESD performance
- Frequency Divider circuits
- Clock pulse
- Frequency Dividers
- Shift registers
- Convert a momentary switch to a toggle switch
- Common Clocks
- Balanced Propagation Delays
- Event Detectors
- Set-reset capability
