SN74LVTH573DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVTH573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.9 ns |
| Turn On Delay Time | 2.9 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVTH573DBR Overview
It is embedded in the 20-SSOP (0.209, 5.30mm Width) package. A package of Cut Tape (CT) has been used. It uses Tri-State as the output. There is D-Type Transparent Latch logic type for this electrical device. Electronic parts are mounted in accordance with Surface Mount. In order for it to operate, it needs a supply voltage of 2.7V~3.6V. A temperature of -40°C~85°C is set as the operating temperature. There are a number of FPGAs in this series, including this one. 8 Bits are used in the design of this electronic part. This device has been designed with 20 terminations available. It is a member of the 74LVTH573 family. The device works with a voltage of 3.3V for its supply voltage. 20 pins are available on it. This electronic device is categorized as a LVT electronic device. In addition, it is designed with a pin number of 20. Electronic parts are mounted using the Surface Mount method. This device has 2 ports. There is a subcategory of FF/Latches for this part. It is recommended that the supply voltage (Vsup) be greater than 2.7V. There are 1 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The device's reliable performance makes it a good choice for TR. The output current of 64mA makes it feature maximum design flexibility. The supply voltage should be maintained at 3.3V for high efficiency. The binary equivalent of the input line is generated by 3 output lines. In order for the device to operate at its maximum power, the maximum power current (ICC) of 5mA is needed for operation.
SN74LVTH573DBR Features
20-SSOP (0.209, 5.30mm Width) package
74LVTH series
8 Bits
74LVTH573 family
20 pin count
20 pins
SN74LVTH573DBR Applications
There are a lot of Texas Instruments SN74LVTH573DBR Latches applications.
- Serial Output Data Queuing
- Display
- Hammer
- Shift right with parallel loading
- Flip-flops
- Serial Input
- Parallel-to-Serial Data Conversion
- Network Switches
- Bus system register with enable parallel lines at bus side
- Automotive HEV/EV Powertrain
