SN74LVTH573DBRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVTH573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.9 ns |
| Turn On Delay Time | 2.9 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 3.9 ns |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVTH573DBRE4 Overview
The package in which it is embedded is named 20-SSOP (0.209, 5.30mm Width). Tape & Reel (TR) is the way in which it is packaged. There is a Tri-State output configured. In this electrical device, the logic type is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 2.7V~3.6V. It is -40°C~85°C at the operating temperature. 74LVTH is the series number of this FPGA. The electronic part in this image has 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. There is no doubt that it belongs to the family 74LVTH573. With a supply voltage of 3.3V, it operates. It is equipped with 20 pin count. This electronic device belongs to the family of LVT. There are 20 pins on it. The electronic part is mounted using the Surface Mount method. 2 ports are available on this device. The part is in the FF/Latches subcategory. 3.6V is the maximum supply voltage (Vsup). A supply voltage (Vsup) greater than 2.7V is required. Its reliable performance makes it an excellent choice for TR. As the output current is 64mA, the design flexibility is maximum. For maximum efficiency, the supply voltage should be set to 3.3V. There are 8 output lines that correspond to the binary equivalents of the input line. A total of 1 elements make up this object. The maximal power current (ICC) supplied for its operation reaches 5mA.
SN74LVTH573DBRE4 Features
20-SSOP (0.209, 5.30mm Width) package
74LVTH series
8 Bits
74LVTH573 family
20 pin count
20 pins
1 elements
SN74LVTH573DBRE4 Applications
There are a lot of Texas Instruments SN74LVTH573DBRE4 Latches applications.
- Avionics
- Multi-line decoders
- Counter
- Data acquisition
- Parallel Output
- Network Switches
- Four-bit storage with output enable
- Audio and video switching
- Flip-flops
- Programmable binary
