SN74LVTH573PW
| Parameters | |
|---|---|
| Packaging | Tube |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVTH573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.9 ns |
| Quiescent Current | 5mA |
| Turn On Delay Time | 2.9 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Control Type | ENABLE LOW |
| Number of Input Lines | 1 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
SN74LVTH573PW Overview
Package 20-TSSOP (0.173, 4.40mm Width) includes it. It is packaged in the way of Tube. It uses the output configuration Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A voltage of 2.7V~3.6V is used as the supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. An FPGA in this series belongs to the 74LVTH family. The design of this electronic part is based on 8 bits. A device such as this has 20 terminations designed. The family it belongs to is 74LVTH573. The device works with a voltage of 3.3V for its supply voltage. It has 20 pins that makes it easy to use. It is a member of the LVT family of electronic devices. With the design of the board, there are only 20 pins. A Surface Mount mounting method has been used for this electronic part. This device is equipped with 2 ports. Subcategory FF/Latches contains this part. If the supply voltage (Vsup) is greater than 2.7V, then the device is working correctly. Electronic circuits are represented by 1 input lines. Due to its 64mA output current, it offers maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 3.3V. 3 output lines generate the binary equivalent of the input lines. It consumes 5mA current from its quiescent state without being affected by external factors at all. It achieves superior flexibility by using 8 circuits.
SN74LVTH573PW Features
20-TSSOP (0.173, 4.40mm Width) package
74LVTH series
8 Bits
74LVTH573 family
20 pin count
20 pins
SN74LVTH573PW Applications
There are a lot of Texas Instruments SN74LVTH573PW Latches applications.
- PCs and Notebooks
- Flip-flops
- Programmable binary
- Watches
- Ring counter
- Counter control
- TV Set-top Boxes
- Serial Output Data Queuing
- Shift right register
- Automotive Cluster
