SN74LVTH573PWR
| Parameters | |
|---|---|
| Control Type | ENABLE LOW |
| Number of Input Lines | 1 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVTH573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.9 ns |
| Quiescent Current | 5mA |
| Turn On Delay Time | 2.9 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
SN74LVTH573PWR Overview
Package 20-TSSOP (0.173, 4.40mm Width) includes it. A Tape & Reel (TR) package is used to package it. It is configured with an output of Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. According to Surface Mount, this electronic part is mounted. A 2.7V~3.6V supply voltage is required to operate it. It is -40°C~85°C at the operating temperature. 74LVTH is the series number of this FPGA. With this electronic part, there are 8 bits. In this device, there are 20 terminations that have been designed. 74LVTH573 is its family. In order to operate it, the supply voltage must be 3.3V. There are 20 pins on it. There is a device in this electronic family called LVT. With the design of the board, there are only 20 pins. The electronic part is mounted using the Surface Mount method. As far as ports are concerned, this device has 2 ports. In the subcategory Bus Driver/Transceiver, this part belongs. It is recommended that the supply voltage (Vsup) be greater than 2.7V. There are electronic circuits attached to the 1 input lines. Considering the reliability of this device, it would be a good candidate for TR. Its output current of 64mA ensures maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 3.3V. The binary equivalent of the input line is generated by 3 output lines. Without external influences, it consumes 5mA quiescent current. In order to achieve its superior flexibility, 8 circuits are used.
SN74LVTH573PWR Features
20-TSSOP (0.173, 4.40mm Width) package
74LVTH series
8 Bits
74LVTH573 family
20 pin count
20 pins
SN74LVTH573PWR Applications
There are a lot of Texas Instruments SN74LVTH573PWR Latches applications.
- Decade counting 7-segment decimal display
- A/D converters
- Storage
- Avionics
- Multi-line decoders
- Data acquisition
- Shift right register
- BCD counting
- Automatic test equipment
- Up/down difference counting
