Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-VFBGA |
Number of Pins |
20 |
Weight |
21.800783mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74LVTH |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Additional Feature |
BROADSIDE VERSION OF 373 |
Subcategory |
FF/Latches |
Packing Method |
TAPE AND REEL |
Technology |
BICMOS |
Voltage - Supply |
2.7V~3.6V |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74LVTH573 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
2.7V |
Number of Ports |
2 |
Output Current |
64mA |
Number of Bits |
8 |
Propagation Delay |
2.9 ns |
Turn On Delay Time |
2.9 ns |
Family |
LVT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
32mA 64mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.064 A |
Prop. Delay@Nom-Sup |
3.9 ns |
Independent Circuits |
1 |
Number of Output Lines |
8 |
Length |
4mm |
Width |
3mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LVTH573ZQNR Overview
In the package 20-VFBGA, it can be found. This package has the format of Tape & Reel (TR). In its configuration, Tri-State is used as the output. There is a logic type of D-Type Transparent Latch for this electrical device. According to Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 2.7V~3.6V. A temperature of -40°C~85°C is set as the operating temperature. The 74LVTH series of FPGAs is the one this FPGA belongs to. Electronic parts with 8 bits are designed for this application. A device such as this has 20 terminations designed. The family it belongs to is 74LVTH573. In order to function, the supply voltage should be set to 3.3V. The device is equipped with 20 pins. This electronic device belongs to the family of LVT. This board has 20 pins on it, which is what it is designed for. The electronic part is mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This part is included in FF/Latches. 3.6V is the maximum voltage (Vsup) that can be supplied. There are 3.3V power supplies attached to it. A voltage greater than 2.7V must be supplied as a power supply (Vsup). The reliability of this device makes it well suited to TAPE AND REEL. The output current of 64mA makes it feature maximum design flexibility. It follows that 8 output lines are generated from the binary equivalent of the input line. In addition to that, it is also characterized by BROADSIDE VERSION OF 373.
SN74LVTH573ZQNR Features
20-VFBGA package
74LVTH series
8 Bits
74LVTH573 family
20 pin count
20 pins
3.3V power supplies
SN74LVTH573ZQNR Applications
There are a lot of Texas Instruments SN74LVTH573ZQNR Latches applications.
- Timers
- Buffer/Storage Registers
- Watches
- Parallel-to-Serial Data Conversion
- Synchronous frequency dividers
- Hammer Device Information
- Frequency
- Counter timers
- Serial Output Data Queuing
- Clocks