SN74LVTH574DWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 150MHz |
| Pin Count | 20 |
| Output Type | TTL |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 64mA |
| Propagation Delay | 3 ns |
| Turn On Delay Time | 3 ns |
| Family | LVT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 4.5 ns |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Power Supply Current-Max (ICC) | 5mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LVTH574DWG4 Overview
The flip flop is packaged in SOIC. There is a TTLoutput configured with it. In total, it contains 1 elements. There are 20 terminations,A voltage of 3.3V provides power to the D latch. This D flip flop belongs to the family of LVT. It is mounted by the way of Surface Mount. The 20pins are designed into the board. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. As a result of its reliability, this D flip flop is ideally suited for TUBE. The D flip flop is embedded with 2ports. For high efficiency, the supply voltage should be set to 3.3V. There is also a characteristic of BROADSIDE VERSION OF 374. The high level output current is set to -32mA. 64mA is the low level output current. It is recommended that the operating temperature be below 85°C. Temperatures above -40°Cshould be used. The RS flip flop is designed to operate with a minimal supply voltage of 2.7VV. 3.6Vis the maximum supply voltage it supports. It is possible to achieve a frequency of 150MHz. There is a logic IC BUS DRIVER used in the D flip flop. There are 1 functions available on the JK flip flop. There are 20 pins on the D latch. The 64mA output current allows it to be designed with the greatest amount of flexibility.
SN74LVTH574DWG4 Features
20 pins
1 Functions
20 pin count
SN74LVTH574DWG4 Applications
There are a lot of Texas Instruments SN74LVTH574DWG4 Flip Flops applications.
- Digital electronics systems
- Single Down Count-Control Line
- Bounce elimination switch
- Buffered Clock
- Set-reset capability
- Test & Measurement
- Supports Live Insertion
- Safety Clamp
- Load Control
- Shift registers
