SN74LVTH574RGYR
| Parameters | |
|---|---|
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Weight | 43.006227mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVTH574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 3 ns |
| Turn On Delay Time | 3 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Output Lines | 3 |
SN74LVTH574RGYR Overview
It is embeded in 20-VFQFN Exposed Pad case. D flip flop is included in the Cut Tape (CT)package. As configured, the output uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. A voltage of 2.7V~3.6Vis used as the supply voltage. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74LVTH series. It should not exceed 150MHzin terms of its output frequency. A total of 1elements are contained within it. As a result, it consumes 190μA of quiescent current without being affected by external factors. Terminations are 20. D latch belongs to the 74LVTH574 family. The power supply voltage is 3.3V. Its input capacitance is 3pFfarads. LVTis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. This board is designed with 20pins on it. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. 8bits are used in its design. A normal operating voltage (Vsup) should remain above 2.7V. In order to achieve its superior flexibility, 8 circuits are used. Considering the reliability of this T flip flop, it is well suited for TR. The flip flop contains 2ports. The supply voltage should be maintained at 3.3V for high efficiency. As a result of its output current of 64mA, it is very flexible in terms of design. In order to operate, the chip has 3 output lines.
SN74LVTH574RGYR Features
Cut Tape (CT) package
74LVTH series
20 pins
8 Bits
SN74LVTH574RGYR Applications
There are a lot of Texas Instruments SN74LVTH574RGYR Flip Flops applications.
- Set-reset capability
- Frequency Divider circuits
- Counters
- Computers
- ESD performance
- Load Control
- ATE
- Instrumentation
- Bounce elimination switch
- CMOS Process
