SN74LVTH574ZQNR
| Parameters | |
|---|---|
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 3 ns |
| Turn On Delay Time | 3 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFBGA |
| Number of Pins | 20 |
| Weight | 21.800783mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVTH574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2.7V |
SN74LVTH574ZQNR Overview
It is packaged in the way of 20-VFBGA. It is included in the package Tape & Reel (TR). T flip flop uses Tri-State, Non-Invertedas the output. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. A voltage of 2.7V~3.6Vis required for its operation. It is operating at a temperature of -40°C~85°C TA. D-Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74LVTHseries FPGA. You should not exceed 150MHzin its output frequency. In total, it contains 1 elements. There is a consumption of 190μAof quiescent energy. 20terminations have occurred. Members of the 74LVTH574family make up this object. An input voltage of 3.3Vpowers the D latch. The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It belongs to the family of electronic devices known as LVT. This electronic part is mounted in the way of Surface Mount. This board has 20 pins. This device has Positive Edgeas its clock edge trigger type. It is part of the FF/Latchesbase part number family. 8bits are used in its design. For normal operation, the supply voltage (Vsup) should be above 2.7V. To achieve this superior flexibility, 8 circuits are used. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. The D flip flop has no ports embedded. A high level of efficiency can be achieved by maintaining the supply voltage at 3.3V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
SN74LVTH574ZQNR Features
Tape & Reel (TR) package
74LVTH series
20 pins
8 Bits
SN74LVTH574ZQNR Applications
There are a lot of Texas Instruments SN74LVTH574ZQNR Flip Flops applications.
- Clock pulse
- 2 – Bit synchronous counter
- Latch
- EMI reduction circuitry
- Supports Live Insertion
- Storage Registers
- Count Modes
- Pattern generators
- Shift Registers
- Buffered Clock
