SN74S112ADR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74S |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | JK Type |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Min (Vsup) | 4.75V |
| Clock Frequency | 125MHz |
| Family | S |
| Current - Quiescent (Iq) | 25mA |
| Current - Output High, Low | 1mA 20mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 7ns @ 5V, 15pF |
| Trigger Type | Negative Edge |
| fmax-Min | 45 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
SN74S112ADR Overview
As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). As part of the package Tape & Reel (TR), it is embedded. T flip flop uses Differentialas its output configuration. The trigger it is configured with uses Negative Edge. There is an electric part mounted in the way of Surface Mount. The supply voltage is set to 4.75V~5.25V. In this case, the operating temperature is 0°C~70°C TA. It is an electronic flip flop with the type JK Type. This type of FPGA is a part of the 74S series. This D flip flop should not have a frequency greater than 125MHz. A total of 2elements are contained within it. As a result, it consumes 25mA quiescent current. Terminations are 16. The power source is powered by 5V. An electronic device belonging to the family Scan be found here. The supply voltage (Vsup) should be maintained above 4.75V for normal operation.
SN74S112ADR Features
Tape & Reel (TR) package
74S series
SN74S112ADR Applications
There are a lot of Rochester Electronics, LLC SN74S112ADR Flip Flops applications.
- Frequency Dividers
- 2 – Bit synchronous counter
- Latch
- Load Control
- Storage Registers
- Asynchronous counter
- Buffered Clock
- Data transfer
- Memory
- Count Modes
