banner_page

SN74S138AN

16 Terminations4.75V~5.25V 16 Pin 74S138 Signal switch74S Series 8 Outputs1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74S138AN
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 545
  • Description: 16 Terminations4.75V~5.25V 16 Pin 74S138 Signal switch74S Series 8 Outputs1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Weight 951.693491mg
Operating Temperature 0°C~70°C
Packaging Tube
Series 74S
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Decoder/Demultiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Decoder/Drivers
Technology TTL
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Base Part Number 74S138
Pin Count 16
Number of Outputs 8
Operating Supply Voltage 5V
Circuit 1 x 3:8
Polarity Inverting, Non-Inverting
Power Supplies 5V
Number of Circuits 1
Power Dissipation 200mW
Number of Bits 8
Propagation Delay 12 ns
Turn On Delay Time 12 ns
Family S
Logic Function Decoder, Demultiplexer
Number of Inputs 3
Current - Output High, Low 400μA 8mA
Supply Type Single
Bandwidth 50MHz
Max I(ol) 0.02 A
Power Supply Current-Max (ICC) 74mA
Voltage Supply Source Single Supply
Input Conditioning STANDARD
Height 5.08mm
Length 19.3mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74S138AN Overview


For the purpose of saving board space, digital switch is included in the 16-DIP (0.300, 7.62mm).Tube is the packaging method.digital switch ic uses the method of Through Hole for mounting.the multiplexers uses IC Decoder/Demultiplexer as the analog IC.When the operating temperature is kept at 0°C~70°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 4.75V~5.25V supply voltage, which gives it a lot of flexibility.Multiplexers from the 74S series can be used in a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.Its logic switch base part number is 74S138 which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThere are 16 component pins in this turn signal switch.Single is used as its supply type.There are 16 pins on it.Through Hole is the way it is mounted.The S family includes the logic switch.The multiplexer ic provides 8 bits.Normally, 5V is powered by a battery.There are 8 outputs designed to operate the turn signal switch.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.This multiplexer is equipped with 3 inputs and 3 outputs.To operate the digitalswitch normally, 1 circuits are formed.

SN74S138AN Features


Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74S138AN Applications


There are a lot of Texas Instruments SN74S138AN Signal Switches / Multiplexers / Decoders applications.

  • Time division multiplexing system
  • Data-routing applications
  • Code converters
  • Audio transmission
  • GLAN
  • LVDS
  • Frequency multiplexing system
  • Relay
  • Arithmetic Logic Units
  • A robotic vehicle with the metal detector

Write a review

Note: HTML is not translated!
    Bad           Good