Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
74S |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Type |
Multiplexer |
Technology |
TTL |
Voltage - Supply |
4.75V~5.25V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74S151 |
Pin Count |
16 |
Number of Outputs |
2 |
Circuit |
1 x 8:1 |
Supply Voltage-Min (Vsup) |
4.75V |
Propagation Delay |
12 ns |
Family |
LS |
Current - Output High, Low |
1mA 20mA |
Supply Type |
Single |
Output Polarity |
COMPLEMENTARY |
Power Supply Current-Max (ICC) |
70mA |
Number of Input Lines |
8 |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74S151D Overview
Providing this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.Tube is the method used for packaging.Surface Mount is the mounting method digital switch ic uses.Multiplexer is the analog IC that the multiplexers uses.By keeping the operating temperature at 0°C~70°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.75V~5.25V, designers are provided with a greater degree of flexibility.Multiplexers in the 74S series are suitable for a wide range of applications.It is designed with 16 terminations as part of its basic configuration.The base part number is 74S151, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 5V volts.This turn signal switch has a total of 16 component pins.As a result, GULL WING represents the end of the conductors.There is a supply type of Single employed as part of this supply.A configuration of 16 pins is used.Surface Mount is the way it is mounted.The logic switch is a member of the LS family.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4.75V.For the turn signal switch's operation, there are 2 outputs.The multiplexers have 8 input lines used to accept voltage levels.
SN74S151D Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
8 input lines
SN74S151D Applications
There are a lot of Texas Instruments SN74S151D Signal Switches / Multiplexers / Decoders applications.
- Home automation system
- A/D converters
- Make full adder
- Make half adder
- Night vision cameras
- Data distribution
- Solenoid cooling fan
- Data bus control
- Electronic circuits
- Data-routing applications