SN74S151N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74S |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74S151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 1 x 8:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Circuits | 1 |
| Power Dissipation | 225mW |
| Propagation Delay | 12 ns |
| Quiescent Current | 45mA |
| Family | S |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 8 |
| Current - Output High, Low | 1mA 20mA |
| Supply Type | Single |
| Max I(ol) | 0.02 A |
| Power Supply Current-Max (ICC) | 70mA |
| Voltage Supply Source | Single Supply |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74S151N Overview
It is included in the 16-DIP (0.300, 7.62mm) in order to save board space.Tube is the method used for packaging.Through Hole is the mounting method digital switch ic uses.A digital IC Multiplexer is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to 0°C~70°C.Designers have greater flexibility using digital controlled switch when it works with 4.75V~5.25V voltage.The multiplexers from 74S series can be used for a wide range of applications.Its basic configuration includes terminations in the 16 range.Its logic switch base part number is 74S151 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V volts.This turn signal switch contains 16 component pins.Single is employed as its supply type.A total of 16 pins are configured on this board.This unit is mounted in the way of Through Hole.The logic switch is a member of the family of S.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4.75V.It is advisable to keep the maximum supply voltage (Vsup) at 5.25V so as to avoid some unnecessary failures.In order for the turn signal switch to work, there are 1 outputs.There are no external influences on this multiplexer ic, so it consumes 45mA current.This multiplexer provides 8 inputs.To ensure that the digitalswitch performs properly, 1 circuits are formed.
SN74S151N Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
SN74S151N Applications
There are a lot of Texas Instruments SN74S151N Signal Switches / Multiplexers / Decoders applications.
- Relay
- Electronics industry
- Analog to digital conversion
- Microprocessor instruction decoding
- Data demultiplexing
- Small scale TV wall
- Electronic circuits
- Data distribution
- VGA
- Memory system of computers
