SN74S169N
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | TCO OUTPUT |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 4 |
| Family | S |
| Logic Function | Counter |
| Max I(ol) | 0.02 A |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 15 ns |
| Power Supply Current-Max (ICC) | 160mA |
| fmax-Min | 40 MHz |
| Count Direction | BIDIRECTIONAL |
| Max Frequency@Nom-Sup | 40000000Hz |
| Load/Preset Input | YES |
| Mode of Operation | SYNCHRONOUS |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN74S169N Overview
This device is supplied in the PDIP package. There are 16 terminations used for its configuration. This device is fully flexible due to the supply voltage of [0]. In all, there are 16 pins on each component. Initially, it appears to belong to the S family. In this device, there is information of 4bits. Based on the Pbfree code, the result may be no. When it comes to this electronic device, TCO OUTPUT are much important features. The temperature grade of this device is COMMERCIAL. As a result of the voltage source, there is 5V voltage. The minimum supply voltage (Vsup) is as low as 4.75V. Typically, the supply voltage (Vsup) is limited to 5.25V. Temperatures above 70°Care usually the maximum operating temperatures.
SN74S169N Features
Embedded in the PDIP package
TCO OUTPUT
SN74S169N Applications
There are a lot of Texas Instruments SN74S169N Counters & Dividers applications.
- Digital multiplexing and demultiplexing
- Time Out Timer for Consumer-Application Industrial Controls
- LINEARIZATION
- SQUARE ROOT
- Signal gating
- POWER COMPUTATION
- Fixed and programmable counters greater than 10
- Up Counters
- Timers
- Time-delay circuits
