SN74S241N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74S |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Through Hole |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.75V~5.25V |
| Base Part Number | 74S241 |
| Number of Outputs | 8 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Channels | 8 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Propagation Delay | 9 ns |
| Quiescent Current | 120mA |
| Turn On Delay Time | 15 ns |
| Logic Function | Buffer, Inverting |
| Number of Inputs | 8 |
| Current - Output High, Low | 15mA 64mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 4 |
| High Level Output Current | -15mA |
| Low Level Output Current | 64mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74S241N Overview
Logical driver uses a neat 20-DIP (0.300, 7.62mm) package. Tube external packaging. Available in Through Hole. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.75V~5.25V. Qualified to operate within 0°C~70°C TA. The high and low logic state output current of logical driver is 15mA 64mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74S series devices. Buffer IC is suitable for Through Hole applications. Logical driver has 20 pins. The bus transceiver employs 4 bits for each element. You can search "74S241" for other related electrical components. In quiescent state, the electronic part uses 120mA. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. 8 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as 0°C. Digital buffer should operate with ambient temperature no higher than 70°C. Buffer driver outputs 64mA to its low level. In high level output mode, the electronic parts may conduct -15mA of current. Voltage used to run voltage buffer should be 4.75V at least. In regard to the maximum supply voltage, buffer driver is rated 5.25V. Wireless transceiver is able to output 3 lines. Because of its 8 lines level input capability, buffer IC is more cost-effective on transimitting signals. Supplier device package of this electronic part would be 20-PDIP. It is sufficient to make 8 outputs. Digital buffer is characterized to have 8 inputs.
SN74S241N Features
High Level Output: 64mA
Low Level Output: -15mA
SN74S241N Applications
There are a lot of Texas Instruments SN74S241N Buffers & Transceivers applications.
- Satellite radio receiver
- Fiber distributed data interface (FDDI)
- Precision geodetic measurement
- Lamps
- Car alarm systems
- Changeing the frequency from IF to RF
- 1x/2x Fiber Channel
- Structural bonding
- Wireless smart house
- Wireless transmission
