Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
74S |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Technology |
TTL |
Voltage - Supply |
4.75V~5.25V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74S373 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Ports |
2 |
Nominal Supply Current |
160mA |
Output Current |
20mA |
Number of Bits |
8 |
Propagation Delay |
12 ns |
Turn On Delay Time |
7 ns |
Family |
S |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Logic Type |
D-Type Transparent Latch |
High Level Output Current |
-6.5mA |
Low Level Output Current |
20mA |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74S373DW Overview
A package called 20-SOIC (0.295, 7.50mm Width) contains it. Tube is the way in which it is packaged. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch associated with this electrical device. Electronic parts are mounted in accordance with Surface Mount. It operates at a voltage of 4.75V~5.25V. There is 0°C~70°C operating temperature. 74S is the series number of this FPGA. This electronic part is designed with 8 Bits. A device such as this has 20 terminations designed. 74S373 is the family name of it. The supply voltage of the device is 5V. With 20 pins, it is equipped. In the world of electronics, this electronic device belongs to the family of S. In addition, it is designed with a pin number of 20. Mounting this electronic component follows the Surface Mount method. As far as ports are concerned, this device has 2 ports. Subcategory FF/Latches contains this part. A total of 5V power supplies are needed to run it. Electronic circuits are represented by 8 input lines. Its 20mA output current allows for maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. There is 20mA low level output current set. It has been set to -6.5mA for the high level output current.
SN74S373DW Features
20-SOIC (0.295, 7.50mm Width) package
74S series
8 Bits
74S373 family
20 pin count
20 pins
5V power supplies
SN74S373DW Applications
There are a lot of Texas Instruments SN74S373DW Latches applications.
- Counting
- High-speed logic
- Pattern generators
- Parallel data storage
- Sample and hold register
- Serial Output Register
- Synchronous frequency dividers
- Shift left register
- Counter
- BCD counting