banner_page

SN74S373DWR

D-Type, Latch 4.75V~5.25V 8 Bits Tri-State Latches 74S Series 74S373 20 Pins DUAL TTL 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74S373DWR
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 620
  • Description: D-Type, Latch 4.75V~5.25V 8 Bits Tri-State Latches 74S Series 74S373 20 Pins DUAL TTL 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Series 74S
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology TTL
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74S373
Pin Count 20
Qualification Status Not Qualified
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.25V
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.75V
Number of Ports 2
Nominal Supply Current 160mA
Number of Bits 8
Propagation Delay 12 ns
Turn On Delay Time 7 ns
Family S
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic Type D-Type Transparent Latch
Max I(ol) 0.02 A
High Level Output Current -6.5mA
Low Level Output Current 32mA
Independent Circuits 1
Number of Output Lines 8
Height Seated (Max) 2.65mm
Width 7.5mm
RoHS Status ROHS3 Compliant

SN74S373DWR Overview


In the package 20-SOIC (0.295, 7.50mm Width), it can be found. Tape & Reel (TR) is the way it is packaged. In this configuration, the output is set to Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. Surface Mount is used to mount this electronic part. The supply voltage of the device is 4.75V~5.25V. There is 0°C~70°C operating temperature. The 74S series contains FPGAs of this type. The electronic part in this image has 8 bits. As far as this device is concerned, it has no terminations. It belongs to 74S373 family. With the supply voltage set at 5V, it is able to operate. It has 20 pins that makes it easy to use. In terms of electronic devices, this one is in the S family. It is designed with 20 pins. A Surface Mount mounting method has been used for this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is a subcategory of FF/Latches for this part. 5.25V is the maximum supply voltage (Vsup). A total of 5V power supplies are required for it to operate. If the supply voltage (Vsup) is greater than 4.75V, then the device is working correctly. Based on its reliable performance, this device is well suited to TAPE AND REEL. Input lines are generated as binary equivalents by 8 output lines. The low level output current is set to 32mA. There is -6.5mA high level output current set.

SN74S373DWR Features


20-SOIC (0.295, 7.50mm Width) package
74S series
8 Bits
74S373 family
20 pin count
20 pins
5V power supplies

SN74S373DWR Applications


There are a lot of Texas Instruments SN74S373DWR Latches applications.

  • Multistage ripple counting
  • Automotive Infotainment
  • Shift left with parallel loading
  • Data acquisition
  • Communication systems
  • Parallel Output
  • Parallel data storage
  • Frequency
  • Timers
  • Automotive ADAS

Write a review

Note: HTML is not translated!
    Bad           Good