SN74S373DWRE4
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74S |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74S373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Ports | 2 |
| Nominal Supply Current | 160mA |
| Number of Bits | 8 |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 7 ns |
| Family | S |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.02 A |
| High Level Output Current | -6.5mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
SN74S373DWRE4 Overview
In the package 20-SOIC (0.295, 7.50mm Width), it can be found. Packaged in the way of Tape & Reel (TR). It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Mounting this electronic component follows the Surface Mount method. A 4.75V~5.25V voltage supply is required for operation. It operates at 0°C~70°C degrees Celsius. In the 74S series, this FPGA is located. It is designed with 8 bits. As far as this device is concerned, it has no terminations. 74S373 is its family. In order to function, the supply voltage should be set to 5V. It has 20 pins that makes it easy to use. It is a member of the S family of electronic devices. In addition, it is designed with a pin number of 20. It is mounted according to the Surface Mount method. This device has a total of 2 ports. This part is included in FF/Latches. 5.25V is the maximum supply voltage (Vsup). There are 5V power supplies attached to it. In order to operate properly, the supply voltage (Vsup) should be greater than 4.75V. As a result of its reliable performance, it is well suited for TAPE AND REEL. There are 8 output lines that correspond to the binary equivalents of the input line. There is 32mA low level output current set. -6.5mA is set as the high level output current.
SN74S373DWRE4 Features
20-SOIC (0.295, 7.50mm Width) package
74S series
8 Bits
74S373 family
20 pin count
20 pins
5V power supplies
SN74S373DWRE4 Applications
There are a lot of Texas Instruments SN74S373DWRE4 Latches applications.
- Parallel data storage
- TV Set-top Boxes
- Automatic test equipment
- Parallel data storage
- Registers
- Display
- Serial Input
- Stacked or Push-Down Registers
- OC-48 communication systems
- Frequency dividing
