SN74S373N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74S |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74S373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Nominal Supply Current | 160mA |
| Output Current | 6.5mA |
| Number of Bits | 8 |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 7 ns |
| Family | S |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 30 ns |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | -6.5mA |
| Low Level Output Current | 20mA |
| Control Type | ENABLE LOW |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74S373N Overview
In the 20-DIP (0.300, 7.62mm) package, it is embedded. A Tube package is used to package it. In its configuration, Tri-State is used as the output. There is a logic type of D-Type Transparent Latch for this electrical device. Through Hole is used to mount this electronic part. It operates with a supply voltage of 4.75V~5.25V. The temperature at which the machine is operating is 0°C~70°C. An FPGA in this series belongs to the 74S family. It is designed with 8 bits. A device with this design has 20 terminations. As a member of the 74S373 family, it falls under that category. A 5V voltage supply is required for operation. 20 pins are available on it. S is the family name of this electronic device. There are 20 pins on it. The electronic part is mounted using the Through Hole method. In this device, there is a total of 2 ports available for use. The part is in the FF/Latches subcategory. The device is powered by 5V power supplies. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The 6.5mA output current gives it maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. The low level output current is set to 20mA. -6.5mA is set as the high level output current.
SN74S373N Features
20-DIP (0.300, 7.62mm) package
74S series
8 Bits
74S373 family
20 pin count
20 pins
5V power supplies
SN74S373N Applications
There are a lot of Texas Instruments SN74S373N Latches applications.
- Buffer register
- Relay replacement
- Automotive Infotainment
- A/D converters
- Meter applications
- Stacked or Push-Down Registers
- A/D and D/A conversion
- Frequency dividing
- Parallel data storage
- Counter
