SN74S374DW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74S |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74S374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Ports | 2 |
| Output Current | 20mA |
| Clock Frequency | 100MHz |
| Propagation Delay | 17 ns |
| Turn On Delay Time | 8 ns |
| Family | S |
| Logic Function | D-Type, Latch |
| Current - Quiescent (Iq) | 110mA |
| Max I(ol) | 0.02 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 17ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -6.5mA |
| Low Level Output Current | 20mA |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74S374DW Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. Package Tubeembeds it. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. The electronic part is mounted in the way of Surface Mount. A supply voltage of 4.75V~5.25V is required for operation. It is operating at 0°C~70°C TA. This electronic flip flop is of type D-Type. In FPGA terms, D flip flop is a type of 74Sseries FPGA. It should not exceed 100MHzin terms of its output frequency. The element count is 1 . It consumes 110mA of quiescent current without being affected by external factors. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74S374, you will find similar parts. It is powered by a voltage of 5V . Sis the family of this D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. In this device, the clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. There is a 5.25Vmaximum supply voltage (Vsup). Keeping the supply voltage (Vsup) above 4.75V is necessary for normal operation. It runs on 5Vvolts of power. This flip flop has a total of 2ports. It offers maximum design flexibility with its output current of 20mA. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. A -6.5mAvalue is set for the high level output current. It is set to 20mAfor low level output current.
SN74S374DW Features
Tube package
74S series
20 pins
5V power supplies
SN74S374DW Applications
There are a lot of Texas Instruments SN74S374DW Flip Flops applications.
- Shift Registers
- Registers
- Reduced system switching noise
- Data Synchronizers
- Computing
- Latch
- Frequency Dividers
- Guaranteed simultaneous switching noise level
- Buffered Clock
- Frequency Divider circuits
