SN74S74D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74S |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74S74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Output Current | 20mA |
| Clock Frequency | 110MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 6 ns |
| Family | S |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 25mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| fmax-Min | 75 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74S74D Overview
The flip flop is packaged in 14-SOIC (0.154, 3.90mm Width). A package named Tubeincludes it. There is a Differentialoutput configured with it. There is a trigger configured with Positive Edge. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.75V~5.25V volts, it operates. 0°C~70°C TAis the operating temperature. D-Typeis the type of this D latch. In terms of FPGAs, it belongs to the 74S series. It should not exceed 110MHzin terms of its output frequency. There is 25mA quiescent consumption. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the 74S74 family. The D flip flop is powered by a voltage of 5V . Sis the family of this D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. This board has 14 pins. The clock edge trigger type for this device is Positive Edge. The part is included in FF/Latches. There are 5V power supplies attached to it. The supply voltage should be maintained at 5V for high efficiency. With an output current of 20mA, this device offers maximum design flexibility. The number of input lines is 4. There are 2 channels available.
SN74S74D Features
Tube package
74S series
14 pins
5V power supplies
SN74S74D Applications
There are a lot of Texas Instruments SN74S74D Flip Flops applications.
- Event Detectors
- Shift registers
- Clock pulse
- Data transfer
- Storage registers
- Bounce elimination switch
- Modulo – n – counter
- QML qualified product
- Single Down Count-Control Line
- Set-reset capability
