SN74S74DR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74S |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Min (Vsup) | 4.75V |
| Clock Frequency | 110MHz |
| Family | S |
| Current - Quiescent (Iq) | 25mA |
| Current - Output High, Low | 1mA 20mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 9 ns |
| fmax-Min | 75 MHz |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
SN74S74DR Overview
14-SOIC (0.154, 3.90mm Width)is the packaging method. D flip flop is embedded in the Tape & Reel (TR) package. As configured, the output uses Differential. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. It operates with a supply voltage of 4.75V~5.25V. The operating temperature is 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. The FPGA belongs to the 74S series. In order for it to function properly, its output frequency should not exceed 110MHz. The element count is 2 . T flip flop consumes 25mA quiescent energy. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The power source is powered by 5V. It belongs to the family of electronic devices known as S. The supply voltage (Vsup) should be kept above 4.75V for normal operation.
SN74S74DR Features
Tape & Reel (TR) package
74S series
SN74S74DR Applications
There are a lot of Rochester Electronics, LLC SN74S74DR Flip Flops applications.
- ATE
- Individual Asynchronous Resets
- Asynchronous counter
- Frequency division
- Power down protection
- Balanced 24 mA output drivers
- Automotive
- Bounce elimination switch
- Synchronous counter
- ESD protection
