SN74S74NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74S |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74S74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Output Current | 20mA |
| Clock Frequency | 110MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 6 ns |
| Family | S |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 25mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| fmax-Min | 75 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74S74NSR Overview
The flip flop is packaged in a case of 14-SOIC (0.209, 5.30mm Width). As part of the package Tape & Reel (TR), it is embedded. It is configured with Differentialas an output. It is configured with the trigger Positive Edge. It is mounted in the way of Surface Mount. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. In the operating environment, the temperature is 0°C~70°C TA. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 74Sseries contain this type of chip. Its output frequency should not exceed 110MHz Hz. There is a consumption of 25mAof quiescent energy. There have been 14 terminations. The object belongs to the 74S74 family. It is powered from a supply voltage of 5V. The electronic device belongs to the Sfamily. Surface Mount mounts this electronic component. There are 14pins on it. In this device, the clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. Despite its superior flexibility, it relies on 2 circuits to achieve it. A reliable performance of this D flip flop makes it well suited for use in TR. A power supply of 5Vis required to operate it. For high efficiency, the supply voltage should be set to 5V. The 20mA output current allows it to be designed with the greatest amount of flexibility. This input has 4lines in it.
SN74S74NSR Features
Tape & Reel (TR) package
74S series
14 pins
5V power supplies
SN74S74NSR Applications
There are a lot of Texas Instruments SN74S74NSR Flip Flops applications.
- 2 – Bit synchronous counter
- Frequency Divider circuits
- High Performance Logic for test systems
- Power down protection
- Count Modes
- Frequency Dividers
- Memory
- Shift registers
- Instrumentation
- Data storage
