Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
64-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
64 |
Weight |
259.993477mg |
Operating Temperature |
0°C~70°C |
Packaging |
Cut Tape (CT) |
Series |
74SSTL |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
64 |
HTS Code |
8542.39.00.01 |
Subcategory |
Bus Driver/Transceivers |
Technology |
BICMOS |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Base Part Number |
74SSTL16837 |
Pin Count |
64 |
Operating Supply Voltage |
3.3V |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
20-Bit |
Load Capacitance |
30pF |
Number of Ports |
2 |
Output Current |
20mA |
Number of Bits |
20 |
Propagation Delay |
3.2 ns |
Direction |
Unidirectional |
Output Characteristics |
3-STATE |
Current - Output High, Low |
20mA 20mA |
Logic Type |
Universal Bus Driver |
Max I(ol) |
0.02 A |
Prop. Delay@Nom-Sup |
4.2 ns |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
90mA |
Height Seated (Max) |
1.2mm |
Length |
17mm |
Width |
6.1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74SSTL16837ADGGR Overview
A copy of it is embedded in the package 64-TFSOP (0.240, 6.10mm Width). It is packaged in the way of Cut Tape (CT). 20-Bit circuits are used to achieve its superior flexibility. There is a logic type Universal Bus Driver associated with this electrical device. Surface Mount is pointing towards the electronic part. Operating temperatures should be higher than 0°C~70°C. It features maximum design flexibility thanks to its High/Low output current. An FPGA of this type belongs to the series 74SSTL and belongs to the category of FPGAs. The supply voltage for the machine is 3V~3.6V and it operates on that voltage. As it belongs to the 74SSTL16837 family, it should be taken into consideration. It is possible to use 64 terminations, which are the ends of a transmission line which should be connected to a device whose characteristic impedance matches that of the transmission line. For normal operation, the supply voltage must be kept above 3.3V in order for the device to function properly. It is equipped with 64 pin count. In order to design this electronic part, 20 Bits have been used. 2 terminations are the kind of termination that occurs when a transmission line is terminated with a device that matches the characteristic impedance of the transmission line. Mounted in the way of Surface Mount is this electronic part. A 64-pin design is used. 3.6V is the maximum supply voltage (Vsup). It is necessary to have a greater supply voltage (Vsup) than 3V in order to operate correctly. A maximum amount of design flexibility can be achieved with 20mA due to its output current. In Bus Driver/Transceivers, there is this part. There is a supply voltage of 3.3V that is used to power this electrical part.
SN74SSTL16837ADGGR Features
64-TFSOP (0.240, 6.10mm Width) package
74SSTL series
74SSTL16837 family
64 pin count
64 pins
SN74SSTL16837ADGGR Applications
There are a lot of Texas Instruments SN74SSTL16837ADGGR Universal Bus Functions applications.
- Analog ICs
- Range hood
- Overcurrent/Short circuit protection
- Alarm circuit using LDR
- Troubleshooting & Judgment
- Data transmission control
- automatic temperature control circuits
- Wearable Health and Fitness Devices
- Printer
- Electric grinding wheel