SN74V215-10PAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Weight | 274.706879mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | 74V |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Base Part Number | 74V215 |
| Function | Synchronous |
| Current - Supply (Max) | 35mA |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Memory Size | 9K 512 x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Access Time | 6.5ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Density | 9 kb |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 10 ns |
| Height | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74V215-10PAG Overview
64-TQFP is a package that contains FIFO memory chip.It's packaged in the shape of a Tray .In addition, the FIFO chip has a memory capacity of 9K 512 x 18 , which can be used to store applications and data.The temperature should be adjusted to 0°C~70°C in order to ensure reliable operation.It is mounted in the Surface Mount position.To operate, the FIFO products requires a voltage supply of 3V~3.6V .A component in the 74V series, this is an memory logic.It has a maximum operating supply current of 35mA .The recommended mounting way is Surface Mount .In addition, it is among the members of the 74V215 family.A supply voltage of 3.3V is capable of producing high efficiency.A total of 64 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 64 pins.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.There is a self-contained gadget within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.It is capable of maintaining good accuracy with a frequency of 100MHz .As a result, Vsup is set at 3.6V (FIFO memory IC's maximum voltage supply).Ideally, the supply voltage (Vsup) should stay above 3V .By using 2 circuits, FIFO memory chip achieves enhanced flexibility.
SN74V215-10PAG Features
9K 512 x 18 memory size
74V series
Best part number of 74V215
FIFOs category
SN74V215-10PAG Applications
There are a lot of Texas Instruments SN74V215-10PAG FIFOs Memory applications.
- Application that requires re-writable nonvolatile parameter memory
- Networking
- Rate buffers
- General Data Collection Applications at Extreme High-Temperatures
- Telecommunication
- Data-acquisition systems
- Battery Charger
- Routers
- Address mapping
- General Data Collection Applications at Low-Temperatures
