SN74V225-10PAG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Weight | 274.706879mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | 74V |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Base Part Number | 74V225 |
| Function | Synchronous |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Memory Size | 18K 1K x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Access Time | 6.5ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Organization | 1KX18 |
| Memory Width | 18 |
| Density | 18 kb |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 10 ns |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74V225-10PAG Overview
This package is included in 64-TQFP .There's a Tray on the package.There is a memory of 18K 1K x 18 available for storing data and applications.A temperature regulation of 0°C~70°C is crucial for reliable operation.It is mounted in the Surface Mount position.To operate, the FIFO products requires a voltage supply of 3V~3.6V .The 74V series is represented by this memory logic.Mounting it in the Surface Mount way is recommended.In addition, it is among the members of the 74V225 family.When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains a total of 64 terminations.In the case of the operation pins, they are 64 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 35mA .In order to maximize efficiency, the supply voltage should be set to 3.3V .There is a self-contained gadget within FIFOs .The IC of the part is OTHER FIFO memory type.In the presence of a 100MHz frequency, it can maintain good accuracy.FIFO memory IC's maximum supply voltage is set to 3.6V .To ensure normal operation, the supply voltage should be greater than 3V (Vsup).By using 2 circuits, FIFO memory chip achieves enhanced flexibility.
SN74V225-10PAG Features
18K 1K x 18 memory size
74V series
Best part number of 74V225
FIFOs category
SN74V225-10PAG Applications
There are a lot of Texas Instruments SN74V225-10PAG FIFOs Memory applications.
- Digital buffering
- Consumer Systems
- Temporary storage elements
- Extended product life cycle
- Emulators
- IP Camera Buffer
- SPI Bus Flash Memory Device
- Game Controller
- Cardiac Monitoring Device
- IP Radio
