SN74V225-15PAG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Weight | 274.706879mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | 74V |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Base Part Number | 74V225 |
| Function | Synchronous |
| Current - Supply (Max) | 35mA |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Memory Size | 18K 1K x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Access Time | 10ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Organization | 1KX18 |
| Memory Width | 18 |
| Density | 18 kb |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 15 ns |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74V225-15PAG Overview
You can find FIFO memory chip in package 64-TQFP .There is a case Tray in which it is packaged.There is a memory of 18K 1K x 18 available for storing data and applications.It is recommended that the temperature be regulated to 0°C~70°C to ensure reliable operation.It is a Surface Mount mounting type FIFO memory.A voltage supply of 3V~3.6V is needed to operate it.It is part of the 74V series of memory logics.In this case, the FIFO's maximum supply current is 35mA .FIFO's FIFO's maximumThe recommended mounting method for this FIFO products is Surface Mount .In addition, it is among the members of the 74V225 family.High efficiency is possible with a supply voltage of 3.3V .In FIFO means, there are 64 terminations.64 pins are used for operation.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .The gadget in FIFOs is self-contained.The IC of the part is OTHER FIFO memory type.When the frequency is set to 66.7MHz it can maintain good accuracy.A FIFO memory IC's maximum supply voltage of 3.6V is set for Vsup.In order to ensure normal operation, the supply voltage (Vsup) should be kept above 3V .Due to the use of 2 circuits, FIFO memory chip has an enhanced level of flexibility.
SN74V225-15PAG Features
18K 1K x 18 memory size
74V series
Best part number of 74V225
FIFOs category
SN74V225-15PAG Applications
There are a lot of Texas Instruments SN74V225-15PAG FIFOs Memory applications.
- Firmware loaders
- Data-acquisition systems
- Test site
- Rate buffers
- Consumer
- Programmable Logic Controller
- Buses
- Controlled baseline
- Communications Systems
- Queues for communication systems
