SN74V245-15PAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Weight | 274.706879mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | 74V |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Base Part Number | 74V245 |
| Function | Synchronous |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Memory Size | 72K 4K x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Access Time | 10ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Organization | 4KX18 |
| Output Characteristics | 3-STATE |
| Density | 72 kb |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 15 ns |
| Height | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74V245-15PAG Overview
The 64-TQFP package contains FIFO memory chip.In terms of packaging, it comes in Tray cases.There is a 72K 4K x 18 MB memory on the FIFO chips, which can be used to store both applications and data.It is recommended that the temperature be kept at 0°C~70°C to ensure reliable operation.Mounting type Surface Mount is assigned to the FIFO memory.It uses a supply voltage of 3V~3.6V to operate.The 74V series contains this memory logic.A Surface Mount mounting method is recommended.I believe it belongs to the 74V245 family of numbers.Supply voltages of 3.3V are capable of achieving high efficiency.A total of 64 terminations can be found in FIFO means.The operation pins are 64 pins.There is a maximum current requirement of 35mA for its operation.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .In FIFOs , there is a self-contained gadget.A OTHER FIFO memory type IC is used in the part.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.Voltage FIFO memory IC's maximum is set to 3.6V .In order to ensure normal operation, the supply voltage (Vsup) should be kept above 3V .The 2 circuit is used in order to enhance its flexibility.
SN74V245-15PAG Features
72K 4K x 18 memory size
74V series
Best part number of 74V245
FIFOs category
SN74V245-15PAG Applications
There are a lot of Texas Instruments SN74V245-15PAG FIFOs Memory applications.
- Video time base correction
- IP Radio
- Address mapping
- Computer Systems
- Desktop Computers
- Communications
- Extended product-change notification
- TVs
- SPI Bus Flash Memory Device
- Test site
