SN74V263-6GGM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LFBGA |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | 74V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CAN ALSO BE CONFIGURED AS 16384 X 9 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 166MHz |
| Base Part Number | 74V263 |
| Function | Synchronous |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.45V |
| Supply Voltage-Min (Vsup) | 3.15V |
| Number of Circuits | 2 |
| Memory Size | 144K 8K x 18 16K x 9 |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Access Time | 4.5ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Organization | 8KX18 |
| Memory Width | 18 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| FWFT Support | Yes |
| Alternate Memory Width | 9 |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.4mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74V263-6GGM Overview
You can find FIFO memory chip in the 100-LFBGA package.In this case, it is packaged in case number Tray .In addition to storing applications and data, the FIFO chips have a memory of 144K 8K x 18 16K x 9 .It is recommended that the temperature of the system be regulated to 0°C~70°C for reliable operation.Mounting type Surface Mount indicates that the FIFO memory is mounted.A 3.15V~3.45V supply voltage is required to power it.The 74V series is represented by this memory logic.Mounting it Surface Mount is recommended.Memory IC belongs to the family of 74V263 .If the supply voltage is set to 3.3V , high efficiency can be achieved.A total of 100 terminations are contained within FIFO means.In the case of the operation pins, they are 100 pins.In order for FIFO design to operate, a maximum current of 35mA is required.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.In FIFOs , there is a self-contained gadget.It has a OTHER FIFO memory type IC.A frequency of 166MHz is capable of maintaining good accuracy.Additionally, CAN ALSO BE CONFIGURED AS 16384 X 9 can be generated with this FIFO memory.There is a FIFO memory IC's maximum supply voltage of 3.45V (Vsup).Ideally, the supply voltage (Vsup) should stay above 3.15V .The 2 circuit is used in order to enhance its flexibility.
SN74V263-6GGM Features
144K 8K x 18 16K x 9 memory size
74V series
Best part number of 74V263
FIFOs category
SN74V263-6GGM Applications
There are a lot of Texas Instruments SN74V263-6GGM FIFOs Memory applications.
- Portable Information Devices
- Controlled baseline
- Cameras
- Computer Systems
- Magnetic memories
- Video time base correction
- IP Camera Buffer
- PC peripheral
- Code converters
- Desktop Computers
