SN74V273-10GGM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LFBGA |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | 74V |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74V273 |
| Function | Synchronous |
| Current - Supply (Max) | 35mA |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3.15V |
| Number of Circuits | 2 |
| Memory Size | 288K 16K x 18 32K x 9 |
| Access Time | 6.5ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Organization | 16KX18 |
| Memory Width | 18 |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| FWFT Support | Yes |
| Alternate Memory Width | 9 |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.4mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
SN74V273-10GGM Overview
You will find FIFO memory chip in the 100-LFBGA package.In this case, it is packaged in case number Tray .There is a 288K 16K x 18 32K x 9 MB memory on the FIFO chips, which can be used to store both applications and data.Regulating the temperature to 0°C~70°C ensures reliable operation.There is Surface Mount mounting type for this FIFO memory.A supply voltage of 3.15V~3.45V is required for its operation.The memory logic belongs to the series 74V .A FIFO's maximum operating supply current of 35mA is available.It is recommended that memory IC be mounted in the Surface Mount direction.Memory IC is a member of the 74V273 family.An input voltage of 3.3V results in high efficiency.A total of 100 terminations can be found in FIFO means.These are the 100 pins for operation.In FIFOs , this gadget is self-contained.It has a type OTHER FIFO memory IC.With a frequency of 100MHz , it exhibits good accuracy.Normally, 3.3V power supplies are owned by the component.As a result, Vsup is set at 3.45V (FIFO memory IC's maximum voltage supply).Ideally, the supply voltage (Vsup) should stay above 3.15V .By using 2 circuits, FIFO memory chip achieves enhanced flexibility.
SN74V273-10GGM Features
288K 16K x 18 32K x 9 memory size
74V series
Best part number of 74V273
FIFOs category
SN74V273-10GGM Applications
There are a lot of Texas Instruments SN74V273-10GGM FIFOs Memory applications.
- Transistors
- Switches
- Video time base correction
- Multimedia
- Cardiac Monitoring Device
- Magnetic memories
- Smart Meter
- Networking
- Medical Monitoring Device
- Portable Information Devices
