SN74V283-6PZA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-LQFP |
| Number of Pins | 80 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | 74V |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO BE CONFIGURED AS 65536 X 9 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 166MHz |
| Base Part Number | 74V283 |
| Function | Synchronous |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.45V |
| Supply Voltage-Min (Vsup) | 3.15V |
| Number of Circuits | 2 |
| Memory Size | 576K 32K x 18 64K x 9 |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Access Time | 4.5ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| FWFT Support | Yes |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 6 ns |
| Height | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74V283-6PZA Overview
You can find FIFO memory chip in the 80-LQFP package.In this case, it is packaged in case number Tray .A memory of 576K 32K x 18 64K x 9 is available for storing applications and data on this FIFO chip.It is advisable to regulate the temperature to 0°C~70°C to ensure reliable operation.Mounting type Surface Mount is assigned to the FIFO memory.A voltage supply of 3.15V~3.45V is needed to operate it.It is a member of the 74V series .Memory IC's recommended mounted way is Surface Mount .In terms of its family, it is part of the 74V283 family.A supply voltage of 3.3V allows for high efficiency.I found that it has 80 terminations in FIFO means.FIFO design has 80 operation pins.The maximum current required for its operation is 35mA .The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.In FIFOs , there is a self-contained gadget.ICs of type OTHER FIFO are used in the FIFO memory chip.In the presence of a 166MHz frequency, it can maintain good accuracy.It is also possible to generate CAN ALSO BE CONFIGURED AS 65536 X 9 with the use of this FIFO memory.Vsup is set to 3.45V (FIFO memory IC's maximum supply voltage).Keeping the supply voltage (Vsup) above 3.15V is essential for normal operation.With 2 circuits, FIFO memory chip offers enhanced flexibility.
SN74V283-6PZA Features
576K 32K x 18 64K x 9 memory size
74V series
Best part number of 74V283
FIFOs category
SN74V283-6PZA Applications
There are a lot of Texas Instruments SN74V283-6PZA FIFOs Memory applications.
- Industrial Systems
- High-speed disk
- Computer networks
- Character generators
- Product traceability
- Magnetic memories
- Signal processing
- Video
- One assembly
- Computers
