SN74V283-7GGM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LFBGA |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | 74V |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Additional Feature | CAN ALSO BE CONFIGURED AS 65536 X 9 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74V283 |
| Function | Synchronous |
| Current - Supply (Max) | 35mA |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3.15V |
| Number of Circuits | 2 |
| Memory Size | 576K 32K x 18 64K x 9 |
| Access Time | 5ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Memory Width | 18 |
| Standby Current-Max | 0.015A |
| Max Frequency | 133MHz |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| FWFT Support | Yes |
| Alternate Memory Width | 9 |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 7.5 ns |
| Height Seated (Max) | 1.4mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
SN74V283-7GGM Overview
The 100-LFBGA package contains FIFO memory chip.Tray case is used for packaging.In addition, the FIFO chip has a memory capacity of 576K 32K x 18 64K x 9 , which can be used to store applications and data.A temperature regulation of 0°C~70°C is crucial for reliable operation.A mounting type of Surface Mount is associated with the FIFO memory.It uses a supply voltage of 3.15V~3.45V to operate.The 74V series comprises this memory logic.As far as operating current is concerned, it has a maximum of 35mA .Memory IC's recommended mounted way is Surface Mount .Memory IC belongs to the 74V283 family.When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains a total of 100 terminations.FIFO design has 100 operation pins.This gadget is self-contained in?FIFOs .This part is equipped with an IC of type OTHER FIFO memory.There are normally 3.3V power supplies attached to the component.It is also possible to generate CAN ALSO BE CONFIGURED AS 65536 X 9 using this FIFO memory.Vsup is set to 3.45V (FIFO memory IC's maximum supply voltage).A voltage above 3.15V is necessary for normal operation.By using 2 circuits, FIFO memory chip has greater flexibility.
SN74V283-7GGM Features
576K 32K x 18 64K x 9 memory size
74V series
Best part number of 74V283
FIFOs category
SN74V283-7GGM Applications
There are a lot of Texas Instruments SN74V283-7GGM FIFOs Memory applications.
- IP Radio
- Laser Receiver System
- Microprogramming
- Look-up Tables
- PC peripheral
- Down-Hole Energy Drilling
- Communications Systems
- Video time base correction
- Measurement Equipment
- Communications
