SN74V283-7PZA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-LQFP |
| Number of Pins | 80 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | 74V |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO BE CONFIGURED AS 65536 X 9 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133MHz |
| Base Part Number | 74V283 |
| Function | Synchronous |
| Current - Supply (Max) | 35mA |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.45V |
| Supply Voltage-Min (Vsup) | 3.15V |
| Number of Circuits | 2 |
| Memory Size | 576K 32K x 18 64K x 9 |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Access Time | 5ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Memory Width | 18 |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| FWFT Support | Yes |
| Alternate Memory Width | 9 |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 7.5 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74V283-7PZA Overview
80-LQFP is a package that contains FIFO memory chip.In terms of packaging, it comes in Tray cases.There is a 576K 32K x 18 64K x 9 MB memory on the FIFO chips, which can be used to store both applications and data.It is recommended that the temperature be kept at 0°C~70°C to ensure reliable operation.There is a mounting type of Surface Mount on the FIFO memory.For operation, it requires a supply voltage of 3.15V~3.45V .It is a member of the 74V series .It has a maximum operating supply current of 35mA .Surface Mount is recommended as the mounting method.Memory IC is a member of the 74V283 family.If the supply voltage is set to 3.3V , high efficiency can be achieved.I found that it has 80 terminations in FIFO means.As far as the operation pins are concerned, they are 80 pins.There is a maximum current requirement of 35mA for its operation.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.A self-contained gadget is contained in FIFOs .A OTHER FIFO memory type IC is used in the part.A frequency of 133MHz is capable of maintaining good accuracy.Additionally, this FIFO memory can be used to generate CAN ALSO BE CONFIGURED AS 65536 X 9 .As a result, Vsup is set at 3.45V (FIFO memory IC's maximum voltage supply).Keeping the supply voltage (Vsup) above 3.15V is essential for normal operation.By using 2 circuits, FIFO memory chip achieves enhanced flexibility.
SN74V283-7PZA Features
576K 32K x 18 64K x 9 memory size
74V series
Best part number of 74V283
FIFOs category
SN74V283-7PZA Applications
There are a lot of Texas Instruments SN74V283-7PZA FIFOs Memory applications.
- GPS Offender Tracking
- Magnetic memories
- General Data Collection Applications at Low-Temperatures
- Microprogramming
- IP Radio
- Programmable Logic Controller
- High-speed graphics pixel buffer
- TVs
- Desktop Computers
- Game Controller
