SN74V283PZAEP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-LQFP |
| Number of Pins | 80 |
| Weight | 639.990485mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tray |
| Series | 74V |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 80 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO BE CONFIGURED AS 65536 X 9 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133MHz |
| Base Part Number | 74V283 |
| Function | Synchronous |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.45V |
| Supply Voltage-Min (Vsup) | 3.15V |
| Number of Circuits | 2 |
| Memory Size | 576K 32K x 18 64K x 9 |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Access Time | 5ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| FWFT Support | Yes |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 7.5 ns |
| Height | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74V283PZAEP Overview
80-LQFP is the package in which FIFO memory chip is contained.In this case, it is packaged in case number Tray .The FIFO chips have a memory of 576K 32K x 18 64K x 9 that can be used to store applications and data.To ensure reliable operation, the temperature should be regulated to -55°C~125°C .Surface Mount is the mounting type of the FIFO memory.To operate, the FIFO products requires a voltage supply of 3.15V~3.45V .A component in the 74V series, this is an memory logic.The recommended mounting way is Surface Mount .The 74V283 family contains this item.When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains 80 terminations.There are 80 pins for operation.For its operation, 35mA is the maximum current required.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.In FIFOs , this gadget is self-contained.A OTHER FIFO memory type IC is used in the part.With a frequency of 133MHz , it maintains good accuracy.Additionally, CAN ALSO BE CONFIGURED AS 65536 X 9 can be generated with this FIFO memory.In this case, the FIFO memory IC's maximum supply voltage is set to 3.45V .A voltage above 3.15V is necessary for normal operation.By using 2 circuitry, FIFO memory chip has enhanced flexibility.
SN74V283PZAEP Features
576K 32K x 18 64K x 9 memory size
74V series
Best part number of 74V283
FIFOs category
SN74V283PZAEP Applications
There are a lot of Texas Instruments SN74V283PZAEP FIFOs Memory applications.
- SPI Bus Flash Memory Device
- Game Controller
- Battery Charger
- Alarm System
- MP3 Interface for Automobile
- Extended product life cycle
- Data-acquisition systems
- Cardiac Monitoring Device
- Application that requires re-writable nonvolatile parameter memory
- Desktop Computers
