banner_page

SN74V293-15GGM

100 Terminations100 Pin 74V293 FIFO memory IC74V Series 1.125M 64K x 18 128K x 910ns


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74V293-15GGM
  • Package: 100-LFBGA
  • Datasheet: PDF
  • Stock: 929
  • Description: 100 Terminations100 Pin 74V293 FIFO memory IC74V Series 1.125M 64K x 18 128K x 910ns (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 100-LFBGA
Number of Pins 100
Operating Temperature 0°C~70°C
Packaging Tray
Series 74V
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 100
ECCN Code EAR99
Subcategory FIFOs
Technology CMOS
Voltage - Supply 3.15V~3.45V
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Supply Voltage 3.3V
Terminal Pitch 0.8mm
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74V293
Function Synchronous
Current - Supply (Max) 35mA
Qualification Status Not Qualified
Supply Voltage-Max (Vsup) 3.45V
Power Supplies 3.3V
Supply Voltage-Min (Vsup) 3.15V
Number of Circuits 2
Memory Size 1.125M 64K x 18 128K x 9
Access Time 10ns
Data Bus Width 18b
Direction Unidirectional
Organization 64KX18
Memory Width 18
Standby Current-Max 0.015A
Memory Density 1179648 bit
Max Frequency 66.7MHz
Parallel/Serial PARALLEL
Memory IC Type OTHER FIFO
Bus Directional Uni-Directional
FWFT Support Yes
Alternate Memory Width 9
Output Enable YES
Expansion Type Depth, Width
Cycle Time 15 ns
Height Seated (Max) 1.4mm
Length 10mm
RoHS Status ROHS3 Compliant

SN74V293-15GGM Overview


FIFO memory chip is contained in the 100-LFBGA package.Tray case is used for packaging.A FIFO chip's memory is 1.125M 64K x 18 128K x 9 , which may be used to store applications and data.Reliable operation requires a temperature of 0°C~70°C .Mounting type Surface Mount is assigned to the FIFO memory.For operation, it requires a supply voltage of 3.15V~3.45V .The 74V series is represented by this memory logic.In this case, the FIFO's maximum supply current is 35mA .FIFO's FIFO's maximumSurface Mount is memory IC's recommended mounting method.Memory IC is a member of the 74V293 family.A supply voltage of 3.3V allows for high efficiency.The number of terminations in FIFO means is 100 .100 pins are the operation pins.FIFOs contains this gadget in its entirety.The IC of the part is of the type OTHER FIFO .It is normal for the component to own 3.3V power supplies.It is set to 3.45V volts for the FIFO memory IC's maximum supply voltage.Maintain the supply voltage (Vsup) above 3.15V for normal operation.By using 2 circuits, FIFO memory chip has greater flexibility.

SN74V293-15GGM Features


1.125M 64K x 18 128K x 9 memory size
74V series
Best part number of 74V293
FIFOs category

SN74V293-15GGM Applications


There are a lot of Texas Instruments SN74V293-15GGM FIFOs Memory applications.

  • Thermal Management for DDR3 Memory Modules
  • Switches
  • Fabrication Site
  • Product traceability
  • Extended product life cycle
  • Rate buffers
  • PC peripheral
  • Desktop Computers
  • GPS Offender Tracking
  • Test Equipment

Write a review

Note: HTML is not translated!
    Bad           Good